Jan
30
2006
Milestones
Author: Frank LaBanca, Ed.D.
One of the great challenges of conducting independent research is balancing and managing time. One technique that is often suggested to insure success is backwards mapping. See these websites for more info: [1] [2]. Basically, when you backward map, you identify what and WHEN you need to do certain tasks to achieve your goals.
Identify two milestones you would like to achieve in your EXPERIMENTAL research. What are they and when would you like to achieve them? Refrain from discussing construction of posters, writing reports, or making presentation.
Perhaps those of you who are extremely tardy with this assignment could share an updated milestone?
February 1st, 2006 at 3:45 pm
I believe there are two major milestones I hope to achieve by the end of the year. First, I hope to test the most frequently used products containing soy. I believe this will give me an accurate result on whether genetic modification is as present as I assumed at the beginning of the year. I plan to test at least three more products besides tofu. Also I will test a control (a product that is certain to contain genetically modified soy). With this goal in mind I will need to test one of the four products each week till March. The next milestone goal I’d like to achieve is using my results for awareness in the community. At this point I’m not sure if this will be simply sending my results to the necessary groups or presenting in Newtown on my findings. This will need to be done between the months of March and June. Therefore, it is vital that I finish my data collection by March.
February 1st, 2006 at 7:15 pm
In my experimental research there are two milestones I would like to achieve by the end of February. This week I am going to completely finish Phase I of my project, which was to test three different concentrations of distilled water contaminated with aluminum chloride. Using a spectrophotometer, I tested the self contaminated water before chitin remediation as a control. Then, I poured the contaminated water samples into the separatory funnel filled with 25 grams of blended lobster shell. I allowed the water to remain in the separatory funnel immersed in the chitin substance for an initial 10 minute remedial filtration period and after I left the contaminated water in the funnel for an overnight remedial period. Tomorrow I will test the final overnight sample and by then end of this week create my standard curve graph based on the levels of absorption. The second milestone I plan to complete by the end of February is to test aluminum chloride contaminated soil using similar methods as to the water testing. This weekend I will finish the construction of my apparatus to remediate soil, an aquarium filled with contaminated soil and a plastic tube in the center drilled with holes and filled with blended lobster shells. In the two weeks before vacation I hope to test and create another graph of my data for the chitin based remediation of soil.
February 1st, 2006 at 8:10 pm
I would like to achieve two major milestones by the end of this school year. First of, I would like to extract curcumin from turmeric efficiently through the microwave. This would create an easier process to set up a reflux in the microwave for not only curcumin, but any other chemicals. There have been some setbacks, but I have to get passed them and make my goal. My second milestone is to quantify the amount of curcumin that I extract. Right now when I extract the curcumin, I extracting other chemicals with it, but curcumin takes up most of the extraction. Extracting curcumin would help in treating Cystic Fibrosis in the future.
February 2nd, 2006 at 10:12 am
By the end of February I need to have completed conducting at least eight interviews, preferably four allergists and four pediatricians. However scheduling has become a big obstacle as many of the doctors have very busy afternoon schedules. Also many pediatricians have referred me to their partner allergists instead of talking to me directly. If I found a way to conduct and record the interviews over the phone, it would be much easier to schedule the remaining four interviews. The second milestone I need to reach by the end of February is finding the theory that emerges from the data once it is axial coded to see whether there is a trend or consensus in the opinions of today’s professionals. In order to determine the theory from the data I must first open and axial code the transcripts of each interview. This is a time consuming procedure and I will be pressed for time to complete it in the month of February.
February 2nd, 2006 at 3:05 pm
I have been working hard to complete my first major milestone of the year, which is to go to New Milford Hospital and study sleep in patients using sophisticated professional equipment operated by certified technicians. This will happen on Friday, February 3. My next milestone needs to be completed in time for the presentations in March. That milestone is to create a project proposal (because I do not have the time or resources to do an experiment by the end of the year) using the knowledge of techniques and the unique insight I hope to gain this Friday at New Milford Hospital.
February 2nd, 2006 at 3:23 pm
There are two major milestones that I hope to achieve by the end of the year. The first one is to create a project proposal for my project. So far I have been juggling ideas about what I am going to speicifically within the realm of West Nile Virus(WNV). My second milestone that I want to achieve is to begin working on my project in the experimental aspect. Whether that means doing the more field work side of WNV and collecting mosquitoes and having Dr. Andreadis as my mentor; or doing the more molecular side and doing ELISA testing with a doctor from UCONN.
February 2nd, 2006 at 6:52 pm
One milestone that I’m going to complete is to figure out how noticeable the difference that stretching and warming-up makes before playing on a snaredrum at high speeds while under control. Another milestone that is likely to be completed this year is discovering how to prevent disease and be safe while playing drums. More specifically, carpal tunnel syndrome will be further researched in order to prevent the build up of lactic acid. For the final milestone, the experimentation involved in muscle manipulation will be hopefully compared to lactic acid and its effects. In stead of focusing specifically on muscles, lactic acid and how to reduce its presence in the human body will be further investigated to improve the quality of practice time while drumming. Not only reducing, but preventing lactic acid build up will be researched to discover newer ways to improve drumming skills.
February 2nd, 2006 at 8:37 pm
The first thing I want to accomplish with my project is to run different trials of sugar solution and record as much data as I can. Once this is done, I can use the data to create more specific experiments to test my data and expand it if possible.
The second milestone that I want to see is the completion of a mathematical model of my data, showing the values and data in comparison to the other data points, this will tell the precision and possible accuracy of my experiments. Both of these should be completed in a month but I don’t know how many tests I will be able to run in that time. It should be enough time to obtain the data to make my project somewhat successful.
February 3rd, 2006 at 6:58 am
There are two major millstones that I hope to reach by the end of the school year. My first millstone is to expose bacteriophage and bacteria to ultraviolet radiation and to infect the bacteria with the bacteriophage. This will hopefully tell me the effects of U.V light on bateriophage reproduction, which is the main objective of my project. My other millstone is to figure out how I can modify the project I am doing know adding new dimensions to it to create a project for next year. This is a millstone for me because I intend to continue with this class next year and want to create a more seasoned in depth project.
February 3rd, 2006 at 2:13 pm
There are two major milestones I hope to achieve by the end of February. The first is to make the robot “muscles” contract and the “leg” bend using solenoids. The second goal to be achieved by the end of the month is to use the information and technology created in the first goal to make the robot walk.
February 4th, 2006 at 6:51 am
I hope to complete two milestones by the end of the year. The first milestone I am going to complete is to remove 50% of an arm from one of the brittle stars. I will be doing this shortly due to the fact that I now have the brittle stars in a constant and stable environment. Once I remove 50% of the arm I will be able to start to measure the regeneration in the arm as well as the reappearence of bioluminescence. The second milestone of my project will be to take close-range pictures of the brittle stars. After I complete this I will then be able to analyze them using the image j software. Once I pass these two milestones I will be very close to the completion of my year long project.
February 4th, 2006 at 2:41 pm
There are many milestones that I hope to achieve in my experimental research. February is a very important month for these milestones. Soil from Deep Brook area has been tested for residual hydrocarbons. Now, I need to analyze the experimental research I have done for that within the next week. I must also sort the macroinvertebrates that I have collected with the Search DEP Protocol and then identify them before February break. Nitrates and phosphates, as well as other water chemistry experimental research must be done before March 1st, 2006. All of the experimental research above will help me achieve the milestone of finding the effect of the oil spills on deep brooks ecosystem. I also hope to find a connection between the temperature and the amount of macroinvertebrates that I was able to collect before March, as well.
April 6th, 2006 at 1:42 pm
Because this blog is so late and I have completed my project, poster and attendance at science fairs my two milestones involve the rest of the year. My first milestone is to complete my lab report write up for the long term project and the second is to come up with a small experiment to keep busy for the rest of the year.
April 6th, 2006 at 5:59 pm
Throughout the entire year I have struggled with finding a project, and actually being able to do it. I am now at the point where I have accompished this, and experimentally, I would like to organized all of the data that I have been able to record, and I would like to be able to normalize and averagize it. Throughout the summer, I would like to continue working with Dr. Calhoun, to collect more data, to verify the results that we have thus far achieved, and see if there is anything else that I can work on, because so far I have found my project very interesting.
April 6th, 2006 at 7:16 pm
Two milestones within the process of my project will be as follows: 1) Synthesizing enough samples using different variables and 2) identifying all the impurities in the compounds through the purification process. The first phase consists of synthesizing more dipyrromethanes using different ketones and acids while altering the procedure to yield the greatest amount of dipyrromethane. The second phase is more time consuming as it requires waiting for the solution to filter through the silicone gel onto thin layer chromatography paper where I will compare and differentiate the impurities from the dipyrromethane under an ultraviolet light. I plan on working on this project throughout the rest of the year, the summer, and into early next year if I am to finish it before too long.
April 6th, 2006 at 9:15 pm
I somehow completed my first two milestones for this year, getting all of my condition index and liver somatic index by the JSHS in time to put my poster together. Now my next to milestones have to do with my testing for ISEF. In order for me to compete on a nationally ranked level, I want to add a vitellogenin assay into my project. My second milestone is testing if the vitellogenin works with the livers having sat in sodium citrate for quite a while. I have to do all of this by late April.
April 7th, 2006 at 5:27 am
My two milestones were, primarily, to build my device and to get it to work, which I accomplished with relative ease in the first few months of the course, and my second milestone was to develop an experiment and carry it out in such a way that would be accurate, and would provide conclusive results if it really worked. Now all I have left to work on is to develop some ideas for my project next year, and play around with possibilities.
September 3rd, 2010 at 8:25 am
I guess there are lots of somebodies like me, who come across assorted good blogs or websites by fortune. Your web log seems to hold a great community and a solid blogosphere presence. Its good to hold interesting and distinct positions on issues.
September 15th, 2010 at 12:34 pm
thanks a lot for this awesome article
June 28th, 2015 at 2:03 am
If the lure is the proper size, you will land some real whoppers.
Like people, each fish has its own preference for food.
It can also be very easy to get your line snagged and lose your bait altogether.
September 25th, 2020 at 5:22 am
certainly appreciate your web-site but you need to test the particular punctuational on a number of your content.. Eric’s Marine Life Quite a few tend to be filled along with transliteration complications and I think it is pretty annoying to tell the fact however I will certainly keep coming back again.
December 9th, 2022 at 8:00 am
Great blog here! Additionally your website quite a bit up fast!
What host are you the usage of? Can I am getting your associate hyperlink
for your host? I wish my site loaded up as fast as yours lol
My website seizure Alarm
March 6th, 2023 at 10:38 pm
rent dedicated server
Applied Science Research » Blog Archive » Milestones
June 6th, 2023 at 6:47 am
What’s up, this weekend is pleasant inn favor of me, because this moment i am reading this impressive educational article here att my
residence.
Feel free too surf to my blog post: onlie Dating, Nuevosjuristas.com,
December 7th, 2023 at 1:20 am
Explore the midsts of qira.io and give your mind a
possibility to grow.Shorten Liinks and bio
December 14th, 2023 at 3:21 pm
Saving Relationships
Applied Science Research » Blog Archive » Milestones
January 16th, 2025 at 9:58 pm
Can you open the trick to winning at Aviator? This game mixes skill, technique, and enjoyment. It provides Nigerian gamers a special wagering experience. Here, wise decisions can turn disappointment into big wins.
Spribe launched Aviator in 2019. It quickly ended up being popular in Nigeria. With a 97% Return to Player (RTP) rate, it’s a chance to check your skills and thinking.
Players can bet from 0.10 to 100 NGN. This makes it enjoyable for many. The game lets you make up to 2 bets per round. This can double your chances of winning and keeps you engaged.
Think of deciding to cash out and winning huge. Pilot’s gameplay is influenced by the plane flies and the chances of winning. multiplier system makes the game thrilling. Players need to balance risk and benefit, going for approximately x10,000 of their preliminary bet.
To win consistently, find out the game’s mechanics. Usage autoplay features and handle your bankroll well. These techniques are essential to success in Aviator.
Comprehending Aviator Game Mechanics and Strategy
The Aviator gambling game is a thrilling obstacle for those who enjoy wagering. It checks your nerve and tactical thinking. You require to stabilize danger and benefit carefully.
To get proficient at the Aviator game, you must comprehend its core mechanics. The video game is easy yet interesting. Gamers bet and try to squander before an aircraft crashes.
Starting with Basic Controls
New to Aviator!.?.!? The game app makes it simple to place bets and squander at the right time. Key elements consist of:
Placing initial bet quantities
Keeping an eye on real-time multiplier progression
Choosing precise moment to squander
Learning the Multiplier System
The multiplier system is the heart of the Aviator betting game. * Statistical insights reveal *:
Over 80% of game events result in multipliers above 2x
Possible multipliers vary from 100x to 1000x
Probability of 2-3x multipliers sits in between 40-42%
Mastering Risk Management Techniques
Successful players understand that making impulsive decisions can ruin their strategy. Good risk management methods:
Setting rigorous spending plan limits
Preventing chasing losses
Executing incremental betting strategies
Using demonstration modes for practice
By predicting the Aviator’s course and understanding its odds, players can improve their winning chances. It’s an enjoyable and exciting method to play.
How to Win Aviator Game Using Proven Methods
Starting your Aviator betting journey needs a clever plan, not just luck. By discovering the game’s details and creating a solid wagering system, you can improve your winnings.
Effective methods for playing Aviator consist of understanding when to cash out early.
Pay attention to patterns and trends in each single round
Analyse historic information for crash point predictions
Develop constant betting methods
Manage danger through disciplined bankroll control to prevent losing your bet.
The Aviator game comes with its own set of difficulties. Discipline is crucial to prevent chasing losses and keep a constant technique. It’s crucial to stay with your plan and not make rash decisions based on emotions.
Successful gamers understand how to take calculated threats. By enjoying typical multipliers over rounds, they can time their cash-outs better. A seasoned gamer saw a 300% boost in winnings by mastering pattern recognition and accurate wagering.
Here are some essential tips:
Start with small bets to comprehend the game
Usage information analytics to improve your forecasts
Set clear wagering limitations to protect your bankroll
Practice frequently to improve
While no method assurances wins all the time, smart play and careful observation can greatly increase your opportunities in Aviator.
Advanced Strategies for Maximum Profits
Mastering the Aviator game needs more than simply standard abilities. Expert players know success is not almost luck. They intend to cash out wisely and manage risks well.
Using information to make decisions can greatly increase your winning chances. The Aviator game utilizes a random number generator. So, it’s crucial to spot patterns and understand statistical chances.
Data-Driven Decision Making
Advanced players utilize in-depth data analysis to assist their bets. Secret techniques include:
Tracking historical multiplier patterns
Analysing real-time game data can assist a gambler make informed decisions.
Recognizing possible crash patterns
Pattern Recognition Techniques
Being proficient at finding patterns is essential in Aviator crash game. Players can improve their game by using efficient bankroll management.
Watching for constant game behaviours
Identifying statistical quirks
Adjusting methods based on recent outcomes
Efficient Autoplay Utilisation
The autoplay feature helps manage bets in a systematic method. Essential points to consider are:
Setting clear risk management strategies is necessary for each gambler. cash-out limitations
Utilizing risk management strategies
Preventing impulsive betting
Keep in mind, successful Aviator gameplay requires discipline, strategic thinking, and mindful risk management.
Conclusion
The world of online casino gaming keeps altering, with Aviator becoming a hit for those who enjoy dynamic wagering. To play Aviator well, you need to understand that winning is everything about smart techniques and playing properly. The video game’s unique multiplier system is challenging, with the airplane’s flight unforeseeable and success based upon careful risk-taking.
Good strategies begin with small bets and comprehending the game’s patterns. It’s essential for online casino players to gamble responsibly. Setting time limits and safeguarding personal data helps keep the video game fun and safe.
Advanced gamers blend analytical thinking with mindful risk-taking. As the video game gets more complex, they discover to read the game’s dynamics. The trick is to stay calm and keep in mind that each round is a brand-new opportunity to use what you’ve found out.
Pilot is more than simply a game to win– it’s a challenge to improve your strategic thinking and risk management. By having fun with patience, doing your research, and staying focused, you can make your online casino Players can experience both fun and intellectually fulfilling minutes while playing this casino game.